100% Made in the USA by The Small Shop®
Three 4" x 4" black Plexiglass bases (kit comes with protective paper on both sides - remove one side and leave paper on the other side until read to use)
Clear Press with Knob
Makes removing photo etch parts from the fret a cinch!
Close accurate cuts mean little or no clean up
Blade won't skip or break like when cutting on glass
Clear press allows you to see and hold the parts
Press combined with acrylic base keeps photo etch flat
Photo etch doesn't deform as when using a cutting mat or scissors
Black bases provide excellent contrast
Helps keep photo etch organized
Parts don't fly away into the carpet monster
Use with a hobby knife and Excel #10 or #22 or other curved blade (not included)
TRUMPETER (MASTER TOOLS) # 09972 1/35 Zimmerit Plastic Sheet-A4 Size
RELEASED JAN 2019
PRACTICE THESE FILLERS AND PUTTIES ON AN AIRPLANE FIRST
MR. HOBBY # MC132 Mr. Cement SPB (Black)
RELEASED SEP 2018
Mr. Cement SPB has the same quick-drying properties as Mr. Cement SP, which has become quite popular in Japan. Because SPB is black, you can easily see where the glue is flowing. Because this adhesive is as strong as the original Cement SP, there is no need to worry that parts might separate after being glued together.
Blade is also forged like a sword, using steel and soft iron. Once you've done a beautiful job on the parts surface, you'll see that the shavings are extracted thanks to the planer itself. If the blade feels dull, you can fix it by sharpening the blade repeatedly using a whetstone.
Material: Yasuki Steel
Made by forging
RP TOOLZ # RP-MICRRNG MICRO RING MAKER
RP TOOLZ # RP-FIGS FIGURE PAINTING HANDLE
RP TOOLZ # RP-MAG60 MAGNETIC HANDLE 60
RP TOOLZ # RP-MAG50 MAGNETIC HANDLE 50
RP TOOLZ # RP-CUTR MITER CUTTER
DSPIAE-Glue Anti-Flip Metal Base
MOXING.NET: REVIEW (use Google Chrome to translate)
DELUXE MATERIALS # AC22 Strip Magic
Softens and removes paint from plastic in minutes.
Stays where it is applied.
May be used on plastic, resin, metals etc.
Non-corrosive & Non-flammable.
A fast acting, spreadable, & controllable paint stripper that will soften and remove paints and primers, typically 5-15 mins according to paint type.
Instructions: Mask off area. Apply with brush or cotton bud and it goes to work straight away. Allow paint to soften and check progress frequently. Clean off softened paint residue as it forms with methylated spirit or isopropyl alcohol using a small brush or cotton bud. Do not leave Strip Magic on bare surface of clean plastic for periods over 10 mins.
CAUTION: Become familiar with speed of action and always check on scrap plastic before use.
DO NOT IMMERSE PLASTIC IN STRIP MAGIC OR APPLY TO BARE PLASTIC.
DELUXE MATERIALS # AD-83 Plastic Magic 10 Second Cement
40 ml bottle.
Plastic Magic 10 sec cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action. It is non-toxic, non-flammable with minimal odor and almost zero emissions when compared to competitors.
It bonds: styrene, plastic card, ABS & most kit plastics. It can be applied to one or both surfaces which can then be adjusted to a perfect position.
It is packed in a stable, anti-spill bottle with a choice of 2 brushes that deliver:
high precision and long reach
the tiniest drop
access to the last drop in the bottle.
Also, unlike competitors Plastic Magic 10 sec cement will not harden brushes and tips. Requires no cleaning.
MENG MTS-029 Bending Pliers FOR PHOTO-ETCHED PARTS
Per MENG: Photo-etched (PE) parts are a good choice for improving the details of models. However, these fine details are not easy to prepare. Have you ever been bothered by the tiny and fragile PE parts?
The MENG MTS-029 Bending Pliers for Photo-Etched Parts are a perfect tool for preparing such precision details. The Bending Pliers are forged from special tool steel. The plier tip which receives multiple treatment is flat and smooth. The extra small flat tip is suitable for handling small and complicate Photo-etched parts. The specially lengthened anti-slip handle offers firm grip. The spring also provides great hand feedback. It will be easier to bend the PE parts by using the Bending Pliers.